BRAKE
Brake
304
M5.0-1055-006
02 Rev. 2/09
5. Insert three screws, 060062-012 to hold brake as-
sembly together. Refer to Figure 16938-01.
6. Remove screws that attach brake assembly to
traction motor. Refer to Figure 16939-01.
7. Remove brake assembly from truck. Refer to Fig-
ure 16940-01.
8. Inspect brake hub. Refer to Figure 16940-01.
Figure 16938-01
1 Mounts to Drive Unit
2 LH Traction Motor
3 Parking Brake
4Screws
Figure 16939-01
1 Mounts to Drive Unit
2 LH Traction Motor
3 Mounting Screws
Figure 16940-01
1 Mounts to Drive Unit
2 LH Traction Motor
3Brake Hub
4 Brake Assembly
5 Screw - Torque 68 ± 6.8 Nm (50.0 ± 5.0 ft lb)
Crown 2007 PF15692-6 Rev. 2/09
To Next Page
Loading...