Dell Force10 S4810P - Set Daylight Saving Time Once

System Time and Date | 1035
Set Daylight Saving Time Once
Set a date (and time zone) on which to convert the switch to daylight saving time on a one-time basis.
Command Syntax Command Mode Purpose
clock summer-time
time-zone date
start-month start-day
start-year start-time
end-month end-day
end-year end-time
[offset]
CONFIGURATION Set the clock to the appropriate timezone and daylight saving time.
time-zone: Enter the three-letter name for the time zone. This name is
displayed in the show clock output.
start-month: Enter the name of one of the 12 months in English.
You can enter the name of a day to change the order of the display to
time day
month year
start-day: Enter the number of the day.
Range: 1 to 31.
You can enter the name of a month to change the order of the display to time
day month year.
start-year: Enter a four-digit number as the year.
Range: 1993 to 2035
start-time: Enter the time in hours:minutes. For the hour variable, use the
24-hour format, example, 17:15 is 5:15 pm.
end-month: Enter the name of one of the 12 months in English.
You can enter the name of a day to change the order of the display to
time day
month year.
end-day: Enter the number of the day.
Range: 1 to 31.
You can enter the name of a month to change the order of the display to time
day month year.
end-year: Enter a four-digit number as the year.
Range: 1993 to 2035.
end-time: Enter the time in hours:minutes. For the hour variable, use the
24-hour format, example, 17:15 is 5:15 pm.
offset: (OPTIONAL) Enter the number of minutes to add during the
summer-time period.
Range: 1 to1440.
Default: 60 minutes
FTOS(conf)#clock summer-time pacific date Mar 14 2009 00:00 Nov 7 2009 00:00
FTOS(conf)#02:02:13: %RPM0-P:CP %CLOCK-6-TIME CHANGE: Summertime configuration changed from
"none" to "Summer time starts 00:00:00 Pacific Sat Mar 14 2009;Summer time ends 00:00:00 pacific
Sat Nov 7 2009"