EasyManua.ls Logo

Dell Force10 S4810P - Link Layer Discovery Protocol (LLDP); AB (LLDP) Overview; Protocol Data Units

Dell Force10 S4810P
1144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Link Layer Discovery Protocol (LLDP) | 641
30
Link Layer Discovery Protocol (LLDP)
Link Layer Discovery Protocol (LLDP) is supported only on platforms: e c s
This chapter contains the following sections:
802.1AB (LLDP) Overview
TIA-1057 (LLDP-MED) Overview
Configuring LLDP
802.1AB (LLDP) Overview
Link Layer Discovery Protocol (LLDP)—defined by IEEE 802.1AB—is a protocol that enables a LAN
device to advertise its configuration and receive configuration information from adjacent LLDP-enabled
LAN infrastructure devices. The collected information is stored in a management information base (MIB)
on each device, and is accessible via SNMP.
Protocol Data Units
Configuration information is exchanged in the form of Type, Length, Value (TLV) segments. Figure 30-1
shows the Chassis ID TLV.
Type—The kind of information included in the TLV
Length—The value, in octets, of the TLV after the Length field
Value—The configuration information that the agent is advertising

Table of Contents

Other manuals for Dell Force10 S4810P

Related product manuals