EasyManuals Logo

Dell Force10 S4810P Configuration Guide

Dell Force10 S4810P
1144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #645 background imageLoading...
Page #645 background image
Link Layer Discovery Protocol (LLDP) | 645
TIA-1057 (LLDP-MED) Overview
Link Layer Discovery Protocol—Media Endpoint Discovery (LLDP-MED) as defined by ANSI/
TIA-1057— provides additional organizationally specific TLVs so that endpoint devices and network
connectivity devices can advertise their characteristics and configuration information; the OUI for the
Telecommunications Industry Association (TIA) is 00-12-BB.
LLDP-MED Endpoint Device—any device that is on an IEEE 802 LAN network edge can
communicate using IP and uses the LLDP-MED framework.
LLDP-MED Network Connectivity Device—any device that provides access to an IEEE 802 LAN
to an LLDP-MED endpoint device and supports IEEE 802.1AB (LLDP) and TIA-1057 (LLDP-MED).
The Dell Force10 system is an LLDP-MED network connectivity device.
With regard to connected endpoint devices, LLDP-MED provides network connectivity devices with the
ability to:
manage inventory
manage Power over Ethernet (PoE)
identify physical location
identify network policy
LLDP-MED is designed for, but not limited to, VoIP endpoints.
TIA Organizationally Specific TLVs
The Dell Force10 system is an LLDP-MED Network Connectivity Device (Device Type 4). Network
connectivity devices are responsible for:
transmitting an LLDP-MED capabilities TLV to endpoint devices
storing the information that endpoint devices advertise
Table 30-3 describes the five types of TIA-1057 Organizationally Specific TLVs.

Table of Contents

Other manuals for Dell Force10 S4810P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dell Force10 S4810P and is the answer not in the manual?

Dell Force10 S4810P Specifications

General IconGeneral
Switching Capacity1.28 Tbps
Forwarding Rate952 Mpps
ManageableYes
Jumbo Frame SupportYes
Jumbo Frame Size9216 bytes
Input Voltage100-240 VAC
Form FactorRack-mountable
Rack Height1U
Power SupplyDual, Hot-swappable
Product TypeSwitch
Operating Temperature32°F to 104°F (0°C to 40°C)
Operating Humidity10% to 90% (non-condensing)
Latency480 ns
MAC Address Table Size128K entries

Related product manuals