Dell Force10 S4810P - Virtual Lans (VLAN)

Virtual LANs (VLAN) | 1053
53
Virtual LANs (VLAN)
Virtual LANs (VLAN) are supported on platforms: e c s z
This section contains the following subsections:
• Default VLAN
• Port-Based VLANs
• VLANs and Port Tagging
• Configuration Task List for VLANs
• Enable Null VLAN as the Default VLAN
Virtual LANs, or VLANs, are a logical broadcast domain or logical grouping of interfaces in a LAN in
which all data received is kept locally and broadcast to all members of the group. When in Layer 2 mode,
VLANs move traffic at wire speed and can span multiple devices. FTOS supports up to 4093 port-based
VLANs and 1 Default VLAN, as specified in IEEE 802.1Q.
VLANs provide the following benefits:
• Improved security because you can isolate groups of users into different VLANs
• Ability to create one VLAN across multiple devices
For more information on VLANs, refer to IEEE Standard 802.1Q Virtual Bridged Local Area Networks.
In this guide, see also:
• Bulk Configuration in Chapter 23, Interfaces
• VLAN Stacking
For a complete listing of all commands related to FTOS VLANs, see these FTOS Command Reference
chapters:
• Interfaces chapter
• Port Authentication (802.1x) section in the Security chapter
• Chapter 20, GARP VLAN Registration Protocol (GVRP).
• Chapter 44, Service Provider Bridging
• Chapter 38, Per-VLAN Spanning Tree Plus (PVST+).
• For E-Series, see also the
ACL VLAN Group and Force10 Resilient Ring Protocol chapters.