558 | IPv6 Routing
www.dell.com | support.dell.com
Show IPv6 Routes
View the global IPv6 routing information with the following command.
Figure 25-7 illustrates the
show ipv6 route command output.
Figure 25-7. Command Example: show ipv6 route
Figure 25-8 illustrates the show ipv6 route summary command output.
Command Syntax Command Mode Purpose
show ipv6 route
type EXEC Show IPv6 routing information for the specified
route type.
Enter the keyword:
• To display information about a network, enter
the ipv6 address (X:X:X:X::X).
• To display information about a host, enter the
hostname.
• To display information about all IPv6 routes
(including non-active routes), enter
all.
• To display information about all connected IPv6
routes, enter
connected.
• To display information about brief summary of
all IPv6 routes, enter summary.
• To display information about Border Gateway
Protocol (BGP) routes, enter bgp.
• To display information about ISO IS-IS routes,
enter isis.
• To display information about Open Shortest Path
First (OSPF) routes, enter ospf.
• To display information about Routing
Information Protocol (RIP), enter rip.
• To display information about static IPv6 routes,
enter static.
• To display information about an IPv6 Prefix
lists, enter list and the prefix-list name.
FTOS#show ipv6 route
Codes: C - connected, L - local, S - static, R - RIP,
B - BGP, IN - internal BGP, EX - external BGP,LO - Locally Originated,
O - OSPF, IA - OSPF inter area, N1 - OSPF NSSA external type 1,
N2 - OSPF NSSA external type 2, E1 - OSPF external type 1,
E2 - OSPF external type 2, i - IS-IS, L1 - IS-IS level-1,
L2 - IS-IS level-2, IA - IS-IS inter area, * - candidate default,
Gateway of last resort is not set
Destination Dist/Metric, Gateway, Last Change
-----------------------------------------------------
C 2001::/64 [0/0]
Direct, Gi 1/1, 00:28:49
C 2002::/120 [0/0]
Direct, Gi 1/1, 00:28:49
C 2003::/120 [0/0]
Direct, Gi 1/1, 00:28:49
To Next Page
Loading...
