Dell Force10 S4810P - RFC and I-D Compliance

1124 | Standards Compliance
www.dell.com | support.dell.com
• Force10 — PVST+
• SFF-8431 — SFP+ Direct Attach Cable (10GSFP+Cu)
• MTU — 9,252 bytes
RFC and I-D Compliance
The following standards are supported by FTOS, and are grouped by related protocol. The columns
showing support by platform indicate which version of FTOS first supports the standard.
Note: Checkmarks () in the E-Series column indicate that FTOS support was added before FTOS
version 7.5.1.
General Internet Protocols
FTOS support, per platform
RFC# Full Name
sc
e
t
e
x
z
768 User Datagram Protocol 7.6.1 7.5.1  8.1.1
793 Transmission Control Protocol 7.6.1 7.5.1  8.1.1
854 Telnet Protocol Specification 7.6.1 7.5.1  8.1.1
959 File Transfer Protocol (FTP) 7.6.1 7.5.1  8.1.1
1321 The MD5 Message-Digest Algorithm 7.6.1 7.5.1  8.1.1
1350 The TFTP Protocol (Revision 2) 7.6.1 7.5.1  8.1.1
1661 The Point-to-Point Protocol (PPP) 
1989 PPP Link Quality Monitoring 
1990 The PPP Multilink Protocol (MP) 
1994 PPP Challenge Handshake Authentication
Protocol (CHAP)

2474 Definition of the Differentiated Services Field (DS
Field) in the IPv4 and IPv6 Headers
7.7.1 7.5.1  8.1.1
2615 PPP over SONET/SDH 
2615 PPP over SONET/SDH 
2698 A Two Rate Three Color Marker  8.1.1
3164 The BSD syslog Protocol 7.6.1 7.5.1  8.1.1
draft-ietf-bf
d-base-03
Bidirectional Forwarding Detection 7.6.1  8.1.1