418 | FIP Snooping
www.dell.com | support.dell.com
Figure 18-9. show fip-snooping system Command Example
Figure 18-10. show fip-snooping vlan Command Example
FIP Snooping Configuration Example
Figure 18-11 shows a S4810 switch used as a FIP snooping bridge for FCoE traffic between an ENode
(server blade) and an FCF (ToR switch). The ToR switch operates as an FCF and FCoE gateway.
Number of FDISC Rejects Number of FIP FDISC reject frames received on the interface.
Number of FLOGO Accepts Number of FIP FLOGO accept frames received on the interface.
Number of FLOGO Rejects Number of FIP FLOGO reject frames received on the interface.
Number of CVLs Number of FIP clear virtual link frames received on the interface.
Number of FCF Discovery
Timeouts
Number of FCF discovery timeouts that occurred on the interface.
Number of VN Port Session
Timeouts
Number of VN port session timeouts that occurred on the interface.
Number of Session failures due
to Hardware Config
Number of session failures due to hardware configuration that occurred on the
interface.
Table 18-5. show fip-snooping statistics Command Descriptions
Field Description
FTOS# show fip-snooping system
Global Mode : Enabled
FCOE VLAN List (Operational) : 1, 100
FCFs : 1
Enodes : 2
Sessions : 17
FTOS# show fip-snooping vlan
* = Default VLAN
VLAN FC-MAP FCFs Enodes Sessions
---- ------ ---- ------ --------
*1 - - - -
100 0X0EFC00 1 2 17
To Next Page
Loading...
