Layer 2 | 623
Display the MAC Address Table
To display the contents of the MAC address table:
MAC Learning Limit
This section has the following sub-sections:
• mac learning-limit dynamic
• mac learning-limit mac-address-sticky
• mac learning-limit station-move
• Learning Limit Violation Actions
• Station Move Violation Actions
• Recovering from Learning Limit and Station Move Violations
• Per-VLAN MAC Learning Limit
Task Command Syntax Command Mode
Display the contents of the MAC address table.
• address displays the specified entry.
• aging-time displays the configured aging-time.
• count displays the number of dynamic and static entries
for all VLANs, and the total number of entries.
•
dynamic displays only dynamic entries
• interface displays only entries for the specified
interface.
• static displays only static entries.
• vlan displays only entries for the specified VLAN.
show mac-address-table [address |
aging-time [vlan vlan-id]| count |
dynamic | interface | static | vlan]
EXEC Privilege
To Next Page
Loading...
