Dell Force10 S4810P - Displaying Stack Port Statistics; Displaying Stack Member Counters

372 | S-Series Debugging and Diagnostics
www.dell.com | support.dell.com
Displaying Stack Port Statistics
The show hardware stack-unit stack-port command displays input and output statistics for a stack-port
interface, as shown in Figure 14-16.
Figure 14-16. Displaying Stack Unit Statistics
Displaying Stack Member Counters
The show hardware stack-unit 0–11 {counters | details | port-stats [detail] | register} command displays internal
receive and transmit statistics, based on the selected command option. A sample of the output is shown for
the
counters option in Figure 14-17.
Figure 14-17. Displaying Stack Unit Counters
FTOS#show hardware stack-unit 2 stack-port 49
Input Statistics:
27629 packets, 3411731 bytes
0 64-byte pkts, 27271 over 64-byte pkts, 207 over 127-byte pkts
17 over 255-byte pkts, 56 over 511-byte pkts, 78 over 1023-byte pkts
0 Multicasts, 5 Broadcasts
0 runts, 0 giants, 0 throttles
0 CRC, 0 overrun, 0 discarded
Output Statistics:
1649714 packets, 1948622676 bytes, 0 underruns
0 64-byte pkts, 27234 over 64-byte pkts, 107970 over 127-byte pkts
34 over 255-byte pkts, 504838 over 511-byte pkts, 1009638 over 1023-byte pkts
0 Multicasts, 0 Broadcasts, 1649714 Unicasts
0 throttles, 0 discarded, 0 collisions
Rate info (interval 45 seconds):
Input 00.00 Mbits/sec, 2 packets/sec, 0.00% of line-rate
Output 00.06 Mbits/sec, 8 packets/sec, 0.00% of line-rate
FTOS#
RIPC4.ge0 : 1,202 +1,202
RUC.ge0 : 1,224 +1,217
RDBGC0.ge0 : 34 +24
RDBGC1.ge0 : 366 +235
RDBGC5.ge0 : 16 +12
RDBGC7.ge0 : 18 +12
GR64.ge0 : 5,176 +24
GR127.ge0 : 1,566 +1,433
GR255.ge0 : 4 +4
GRPKT.ge0 : 1,602 +1,461
GRBYT.ge0 : 117,600 +106,202
GRMCA.ge0 : 366 +235
GRBCA.ge0 : 12 +9
GT64.ge0 : 4 +3
GT127.ge0 : 964 +964
GT255.ge0 : 4 +4
GT511.ge0 : 1 +1
GTPKT.ge0 : 973 +972
GTBCA.ge0 : 1 +1
GTBYT.ge0 : 71,531 +71,467
RUC.cpu0 : 972 +971
TDBGC6.cpu0 : 1,584 +1,449=