EasyManua.ls Logo

Dell Force10 S4810P - Ipv6 Routing; Protocol Overview

Dell Force10 S4810P
1144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
IPv6 Routing | 537
25
IPv6 Routing
IPv6 Routing is supported on platforms e c s
IPv6 (Internet Protocol Version 6) is the successor to IPv4. Due to the extremely rapid growth in internet
users and IP addresses, IPv4 is reaching its maximum usage. IPv6 will eventually replace IPv4 usage to
allow for the constant expansion.
This chapter provides a brief discussion of the differences between IPv4 and IPv6, and the Dell Force10
support of IPv6. This chapter discusses the following, but is not intended to be a comprehensive discussion
of IPv6.
Protocol Overview
Extended Address Space
Stateless Autoconfiguration
IPv6 Headers
Implementing IPv6 with FTOS
ICMPv6
Path MTU Discovery
IPv6 Neighbor Discovery
QoS for IPv6
IPv6 Multicast
SSH over an IPv6 Transport
Configuration Task List for IPv6
Protocol Overview
IPv6 is an evolution of IPv4. IPv6 is generally installed as an upgrade in devices and operating systems.
Most new devices and operating systems support both IPv4 and IPv6.
Some key changes in IPv6 are:
Extended Address Space
Note: The IPv6 basic commands are supported on all platforms. However, not all features are supported
on all platforms, nor for all releases. See Table 25-2 to determine the FTOS version supporting which
features and platforms.

Table of Contents

Other manuals for Dell Force10 S4810P

Related product manuals