180 | Border Gateway Protocol
www.dell.com | support.dell.com
Figure 9-4 illustrates the decisions BGP goes through to select the best path. The list following the
illustration details the path selection criteria.
Figure 9-4. BGP Best Path Selection
Syste
Note: In 8.3.11.4, the bgp bestpath as-path multipath-relax command is disabled by default, preventing
BGP from load-balancing a learned route across two or more eBGP peers. To enable load-balancing across
different eBGP peers, enable the bgp bestpath as-path multipath-relax command.
A system error will result if the bgp bestpath as-path ignore command and the bgp bestpath as-path
multipath-relax command are configured at the same time. Only enable one command at a time.
To Next Page
Loading...
