Data Center Bridging (DCB) | 315
3 (Optional) Configure the bandwidth percentage
allocated to priority traffic in port queues.
Percentage range: 1 to 100% in units of 1%.
The sum of bandwidth percentage assigned to
dot1p priorities/queues in a priority group should
be 100%.
Default: None.
Note: If you configure bandwidth allocation, you
cannot configure a scheduling method in Step 2.
bandwidth-percentage
percentage
POLICY-MAP-OUT-ETS
4 Exit ETS Output Policy Configuration mode.
exit
POLICY-MAP-OUT-ETS
Step Task Command Command Mode
To Next Page
Loading...
