EasyManua.ls Logo

Dell Force10 S4810P

Dell Force10 S4810P
1144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Data Center Bridging (DCB) | 341
Table 13-4. show interface ets detail Command Description
Field Description
Interface Interface type with stack-unit and port number.
Max Supported TC Group Maximum number of priority groups supported.
Number of Traffic Classes Number of 802.1p priorities currently configured.
Admin mode ETS mode: on or off.
When on, the scheduling and bandwidth allocation configured in an ETS
output policy or received in a DCBx TLV from a peer can take effect on an
interface.
Admin Parameters ETS configuration on local port, including priority groups, assigned dot1p
priorities, and bandwidth allocation.
Remote Parameters ETS configuration on remote peer port, including Admin mode (enabled if a
valid TLV was received or disabled), priority groups, assigned dot1p
priorities, and bandwidth allocation. If the ETS Admin mode is enabled on the
remote port for DCBx exchange, the Willing bit received in ETS TLVs from
the remote peer is included.
Local Parameters ETS configuration on local port, including Admin mode (enabled when a
valid TLV is received from a peer), priority groups, assigned dot1p priorities,
and bandwidth allocation.
Operational status (local port) Port state for current operational ETS configuration:
Init: Local ETS configuration parameters were exchanged with peer.
Recommend: Remote ETS configuration parameters were received from peer.
Internally propagated: ETS configuration parameters were received from
configuration source.
ETS DCBx Oper status Operational status of ETS configuration on local port: match or mismatch.
State Machine Type Type of state machine used for DCBx exchanges of ETS parameters:
Feature - for legacy DCBx versions; Asymmetric - for an IEEE version.
Conf TLV Tx Status Status of ETS Configuration TLV advertisements: enabled or disabled.
ETS TLV Statistic:
Input Conf TLV pkts
Number of ETS Configuration TLVs received.
ETS TLV Statistic:
Output Conf TLV pkts
Number of ETS Configuration TLVs transmitted.
ETS TLV Statistic:
Error Conf TLV pkts
Number of ETS Error Configuration TLVs received.

Table of Contents

Other manuals for Dell Force10 S4810P

Related product manuals