Dell Force10 S4810P

772 | Open Shortest Path First (OSPFv2 and OSPFv3)
www.dell.com | support.dell.com
To display the IPsec security associations (SAs) used on OSPFv3 interfaces, enter the following command:
Command Syntax Command Mode Usage
show crypto ipsec sa ipv6
[interface interface]
EXEC Privilege Displays security associations set up for OSPFv3 links in IPsec
authentication and encryption policies on the router.
To display information on the SAs used on a specific interface,
enter interface interface, where interface is one of the following
values:
For a 1-Gigabit Ethernet interface, enter
GigabitEthernet slot/port.
For a Port Channel interface, enter port-channel number. Valid
port-channel numbers (on an E-Series TeraScale):
1 to 255.
For a 10-Gigabit Ethernet interface, enter TenGigabitEthernet
slot/port.
For a VLAN interface, enter vlan vlan-id.
Valid VLAN IDs: 1 to 4094