Fujitsu PRIMERGY TX1320 M1 Upgrade And Maintenance Manual

166 Upgrade and Maintenance Manual TX1320 M1
System fan and HDD fan
8.2.2.3 Removing the HDD fan module
Figure 73: Removing the HDD fan module
Ê Push on the locking lever (1) to disengage the HDD fan module holder out
of the retaining brackets.
Ê Lift the HDD fan module holder with the fan module out of the chassis (2).
/
0

Fujitsu PRIMERGY TX1320 M1 Specifications

General

Processor Sockets	1
Memory Slots	4
Form Factor	Tower
Processor	Intel Celeron
Storage	Up to 4 x 3.5" or 2.5" drives
Drive Bays	4 x 3.5-inch or 8 x 2.5-inch
RAID Support	RAID 0, 1, 10
Network Controller	Dual-port Gigabit Ethernet
Operating System Support	Linux