Fujitsu PRIMERGY TX1320 M1 Upgrade And Maintenance Manual

302 Upgrade and Maintenance Manual TX1320 M1
System board and components
14.4.3.2 Removing the defective TPM
Ê Remove the TPM as described in section "Removing the TPM" on page 297.
Ê Leave the TPM spacer on the system board when removing the defective
TPM.
14.4.3.3 Installing the new TPM
Ê The TPM spacer is already present on the system board.
Ê Install the TPM as described in section "Installing the TPM" on page 293.
14.4.3.4 Concluding steps
Ê "Installing the system fan module" on page 156
Ê "Closing the server" on page 64
Ê "Connecting the server to the mains" on page 67
Ê "Switching on the server" on page 71
Ê "Enabling BitLocker functionality" on page 99

Fujitsu PRIMERGY TX1320 M1 Specifications

General

Processor Sockets	1
Memory Slots	4
Form Factor	Tower
Processor	Intel Celeron
Storage	Up to 4 x 3.5" or 2.5" drives
Drive Bays	4 x 3.5-inch or 8 x 2.5-inch
RAID Support	RAID 0, 1, 10
Network Controller	Dual-port Gigabit Ethernet
Operating System Support	Linux