Fujitsu PRIMERGY TX1320 M1 Upgrade And Maintenance Manual

294 Upgrade and Maintenance Manual TX1320 M1
System board and components
14.4.1.2 Installing the TPM
Figure 178: TPM kit
Figure 179: TPM mounting location
Figure 180: Installing the TPM spacer
Ê Snap the TPM spacer into the cut-out in the system board.
1 TPM (Trusted Platform Module) 3 Special screw for TPM
2 TPM spacer
I The black TPM spacer is
not used in this server.
4 TPM bit insert for TPM special
screw

Fujitsu PRIMERGY TX1320 M1 Specifications

General

Processor Sockets	1
Memory Slots	4
Form Factor	Tower
Processor	Intel Celeron
Storage	Up to 4 x 3.5" or 2.5" drives
Drive Bays	4 x 3.5-inch or 8 x 2.5-inch
RAID Support	RAID 0, 1, 10
Network Controller	Dual-port Gigabit Ethernet
Operating System Support	Linux