Fujitsu PRIMERGY TX1320 M1 Upgrade And Maintenance Manual

72 Upgrade and Maintenance Manual TX1320 M1
Basic hardware procedures
4.10 Concluding software tasks
Ê Perform the following software tasks to put the server back in operation:
– "Resetting the boot retry counter" on page 90
– "Verifying the system time settings" on page 95
– "Viewing and clearing the System Event Log (SEL)" on page 96
– "Updating the NIC configuration file in a Linux environment" on page 97
– "Enabling BitLocker functionality" on page 99
– "Performing a RAID array rebuild" on page 100
– "Looking up changed MAC / WWN addresses" on page 100
– "Configuring LAN teaming" on page 78

Fujitsu PRIMERGY TX1320 M1 Specifications

General

Processor Sockets	1
Memory Slots	4
Form Factor	Tower
Processor	Intel Celeron
Storage	Up to 4 x 3.5" or 2.5" drives
Drive Bays	4 x 3.5-inch or 8 x 2.5-inch
RAID Support	RAID 0, 1, 10
Network Controller	Dual-port Gigabit Ethernet
Operating System Support	Linux