Fujitsu PRIMERGY TX1320 M1 Upgrade And Maintenance Manual

TX1320 M1 Upgrade and Maintenance Manual 291
System board and components
14.3.3.3 Installing the new UFM
Figure 175: Preparing the new UFM
Ê Remove the nylon screw from the new UFM (1).
Ê Remove the UFM spacer (2).
Figure 176: Installing the UFM
Ê Fit the UFM on the UFM connector and the remaining UFM spacer (1).
Ê Secure the UFM to the UFM spacer with the nylon screw (2).

Fujitsu PRIMERGY TX1320 M1 Specifications

General

Processor Sockets	1
Memory Slots	4
Form Factor	Tower
Processor	Intel Celeron
Storage	Up to 4 x 3.5" or 2.5" drives
Drive Bays	4 x 3.5-inch or 8 x 2.5-inch
RAID Support	RAID 0, 1, 10
Network Controller	Dual-port Gigabit Ethernet
Operating System Support	Linux