Fujitsu PRIMERGY TX1320 M1 - Removing the UFM; Concluding Steps

TX1320 M1 Upgrade and Maintenance Manual 289
System board and components
14.3.2.2 Removing the UFM
Figure 173: Removing the UFM (A)
Ê Remove the nylon screw (1).
Ê Disconnect and remove the UFM (2).
Figure 174: Removing the UFM (B)
Ê The UFM spacer remains on the system board.
14.3.2.3 Concluding steps
Ê "Closing the server" on page 64
Ê "Connecting the server to the mains" on page 67
Ê "Switching on the server" on page 71
Ê "Enabling BitLocker functionality" on page 99