Fujitsu PRIMERGY TX1320 M1 Upgrade And Maintenance Manual

316 Upgrade and Maintenance Manual TX1320 M1
System board and components
Ê "Verifying the system time settings" on page 95
Ê "Looking up changed MAC / WWN addresses" on page 100
Ê "Updating the NIC configuration file in a Linux environment" on page 97
Ê "Enabling SVOM boot watchdog functionality" on page 92
Ê "Enabling BitLocker functionality" on page 99
Ê If applicable, reconfigure your network settings in the operation system
according to the original configuration of the replaced controller (expansion
card or onboard).
Ê If applicable, "After replacing the system board" on page 103

Fujitsu PRIMERGY TX1320 M1 Specifications

General

Processor Sockets	1
Memory Slots	4
Form Factor	Tower
Processor	Intel Celeron
Storage	Up to 4 x 3.5" or 2.5" drives
Drive Bays	4 x 3.5-inch or 8 x 2.5-inch
RAID Support	RAID 0, 1, 10
Network Controller	Dual-port Gigabit Ethernet
Operating System Support	Linux