HEIDENHAIN TNC 620 Programming Station User Manual

Batch Process Manager | Batch Process Manager (option 154)
15
618
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017
In the Batch Process Manager you can move a line in the job list as
follows:
Open the desired job list
Press the EDIT soft key
Place the cursor on the desired line, e.g.
Program
The control displays the selected line in blue.
Press the MOVE soft key
Press the TAG soft key
The control highlights the line in which the cursor
is positioned.
Place the cursor on the desired position.
When the cursor is placed at a suitable position,
the control shows the INSERT BEFORE and
INSERT AFTER soft keys.
Press the INSERT BEFORE soft key
The control inserts the line at the new position.
Press the GO BACK soft key
Press the EDIT soft key
Executing the job list
You can execute the job list using the pallet management
Further information: "Processing pallet table", page 603
The control opens the job list as a pallet table in the pallet
management (.p).

HEIDENHAIN TNC 620 Programming Station Specifications

General

Brand	HEIDENHAIN
Model	TNC 620 Programming Station
Category	Control Systems
Language	English