MOD Functions | System settings
19
746
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017
19.5 System settings
Set the system time
With the Set the system time MOD function you can set the time
zone, date and time manually or with the aid of an NTP server
synchronization.
Proceed as follows to set the system time:
In the MOD menu, select the System settings group
Press the SET DATE/ TIME soft key
In the Time zone area, select the desired time zone
Press the NTP on soft key in order to select the Set the time
manually entry
Change the date and time as needed
Press the OK soft key
To set the system time with the aid of an NTP server:
In the MOD menu, select the System settings group
Press the SET DATE/ TIME soft key
In the Time zone area, select the desired time zone
Press the NTP off soft key in order to select the Synchronize
the time over NTP server entry
Enter hostnames or the URL of an TNP server
Press the Add soft key
Press the OK soft key
To Next Page
Loading...
Need help?
General
