Tables and Overviews | Technical Information
20
798
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017
Software options
Advanced Function Set 1 (option 8)
Expanded functions Group 1 Machining with rotary tables
Cylindrical contours as if in two axes
Feed rate in distance per minute
Coordinate conversions:
Tilting the working plane
Advanced Function Set 2 (option 9)
Expanded functions Group 2
Export license required
3-D machining:
Motion control with minimum jerk
3-D tool compensation through surface-normal vectors
Using the electronic handwheel to change the angle of
the swivel head during program run without affecting the
position of the tool center point (tool tip or center of sphere)
(TCPM = Tool Center Point Management)
Keeping the tool normal to the contour
Tool radius compensation perpendicular to traversing direction and
tool direction
Interpolation:
Linear in 5 axes
Touch Probe Functions (option 17)
Touch probe cycles:
Compensation of tool misalignment in automatic mode
Presetting in the Manual operation mode of operation
Presetting in automatic mode
Automatically measuring workpieces
Tools can be measured automatically
Touch probe functions
HEIDENHAIN DNC (option 18)
Communication with external PC applications over COM component
Advanced Programming Features (option 19)
Expanded programming functions FK free contour programming:
Programming in HEIDENHAIN conversational format with graphic
support for workpiece drawings not dimensioned for NC
To Next Page
Loading...
Need help?
General
