Juniper QFX5110 Series User Manual

Table 11: Deployment Checklist (continued)
DatePerformed ByFor More InformationItem or Task
“QFX5110 Rack Requirements” on page 109
“Rack Requirements for a QFX5100 Device”
on page 111
“Cabinet Requirements for a QFX5100
Device” on page 117
“Rack Requirements for a QFX3600 or
QFX3600-I Device” on page 112
“Cabinet Requirements for a QFX3600 or
QFX3600-I Device” on page 118
“Rack Requirements for a QFX3500 Device”
on page 114
“Cabinet Requirements for a QFX3500
Device” on page 119
Rack Requirements for EX4300 Switches
Cabinet Requirements for EX4300 Switches
Verify that your rack or cabinet
meets the minimum requirements
for the installation of the switch.
“QFX5110 Clearance Requirements for
Airflow and Hardware Maintenance” on
page 121
“Clearance Requirements for Airflow and
Hardware Maintenance for a QFX5100
Device” on page 122
“Clearance Requirements for Airflow and
Hardware Maintenance for a QFX3600 or
QFX3600-I Device” on page 123
“Clearance Requirements for Airflow and
Hardware Maintenance for a QFX3500
Device” on page 125
“Clearance Requirements for Airflow and
Hardware Maintenance for EX4300
Switches” on page 126
Plan rack or cabinet location,
including required space
clearances.
Secure the rack or cabinet to the
floor and building structure.
89

Juniper QFX5110 Series Specifications

General

Rack Units	1U
Operating System	Junos OS
Form Factor	Fixed
Management	CLI, SNMP, NETCONF
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Humidity	5% to 90% non-condensing
AC Power Input	100-240 VAC
Power Supply	Redundant, hot-swappable