12. Interconnect all other spine devices to all other leaf devices using supported VCP interfaces.
13. Install the VCF feature licenses.
For a VCF deployment, two license keys are recommended for redundancy—one for the device in the
primary Routing Engine role and the other for the device in the backup Routing Engine role.
To purchase a feature license for VCF, contact your Juniper Networks sales representative
(https://www.juniper.net/us/en/contact-us/sales-offices). The Juniper sales representative will provide
you with the feature license files and license keys. You will be asked to supply the chassis serial number
of your switch; you can obtain the serial number by running the show virtual-chassis command.
After obtaining the licenses, follow the instructions in Generating License Keys.
RELATED DOCUMENTATION
Understanding Virtual Chassis Fabric Configuration | 4
Adding a Device to a Virtual Chassis Fabric | 394
Removing a Device From a Virtual Chassis Fabric | 405
Understanding Virtual Chassis Fabric Components
Autoprovisioning a Virtual Chassis Fabric | 368
Understanding Traffic Flow Through a Virtual Chassis Fabric
379
To Next Page
Loading...
Need help?
General
