Juniper QFX5110 Series User Manual

Table 6: Components in 48-Port EX4300 Switches (continued)
Supported Uplink
Modules
Power Supply
Shipped by
DefaultFan Modules
Number
of PoE-
enabled
PortsBuilt-In PortsSwitch Models
4-port 10-Gigabit
Ethernet SFP+
uplink module
(model number:
EX-UM-4X4SFP)
Power supplies
for this model
are not shipped
by default; you
must order
either AC power
supplies or DC
power supplies
separately.
Fan modules for
this model are not
shipped by default;
you must order
two fan modules
labeled either AIR
OUT (AFO) or AIR
IN (AFI) separately
048
10/100/1000BASE-T
Ethernet ports and
four QSFP+ ports
EX4300-48T-S
4-port 10-Gigabit
Ethernet SFP+
uplink module
(model number:
EX-UM-4X4SFP)
A 350 W AC
power supply
with the AIR IN
(AFI) label.
Two fan modules;
each with an AIR
IN (AFI) label.
048
10/100/1000BASE-T
Ethernet ports and
four QSFP+ ports
EX4300-48T-AFI
4-port 10-Gigabit
Ethernet SFP+
uplink module
(model number:
EX-UM-4X4SFP)
A 550 W DC
power supply
with the AIR
OUT (AFO)
label.
Two fan modules;
each with an AIR
OUT (AFO) label.
048
10/100/1000BASE-T
Ethernet ports and
four QSFP+ ports
EX4300-48T-DC
4-port 10-Gigabit
Ethernet SFP+
uplink module
(model number:
EX-UM-4X4SFP)
A 550 W DC
power supply
with the AIR IN
(AFI) label.
Two fan modules;
each with an AIR
IN (AFI) label.
048
10/100/1000BASE-T
Ethernet ports and
four QSFP+ ports
EX4300-48T
-DC-AFI
4-port 10-Gigabit
Ethernet SFP+
uplink module
(model number:
EX-UM-4X4SFP)
A 1100 W AC
power supply
with the AIR
OUT (AFO)
label.
Two fan modules;
each with an AIR
OUT (AFO) label.
4848
10/100/1000BASE-T
Ethernet ports and
four QSFP+ ports
EX4300-48P
67

Juniper QFX5110 Series Specifications

General

Rack Units	1U
Operating System	Junos OS
Form Factor	Fixed
Management	CLI, SNMP, NETCONF
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Humidity	5% to 90% non-condensing
AC Power Input	100-240 VAC
Power Supply	Redundant, hot-swappable