Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X User Manual

IP Service Profile Configuration Mode
In this mode, you can specify the information that the system uses in creating IP
service profiles.
From Global Configuration mode, type ip service-profile and the service profile
name, and press Enter.
host1(config)#ip service-profile radius
host1(config-service-profile)#?
default Set a command to its default(s)
do Run an exec mode command (alias command run)
domain Configure a username domain
exit Exit from the current command mode
help Describe the interactive help system
include Configure an attribute to be included in a username
log Configure logging settings
macro Run a CLI macro
no Negate a command or set its default(s)
password Configure a user password
run Run an exec mode command (alias command do)
sleep Make the Command Interface pause for a specified duration
user-name Configure a user name
user-prefix Configure a username prefix
IPSec CA Identity Configuration Mode
In this mode, you can specify the information that the system uses in online certificate
requests and during negotiations with its peers.
From Global Configuration mode, type ipsec ca identity, and press Enter.
host1(config)#ipsec ca identity
host1(config-ca-identity)#?
crl Certificate Revocation List checking
default Set a command to its default(s)
do Run an exec mode command (alias command run)
enrollment Configure enrollment parameters
exit Exit from the current command mode
help Describe the interactive help system
issuer-identifier issuer identifier
log Configure logging settings
macro Run a CLI macro
no Negate a command or set its default(s)
root Specify root proxy
run Run an exec mode command (alias command do)
sleep Make the Command Interface pause for a specified
IPSec Identity Configuration Mode
In this mode, you can specify the information that the system uses in offline certificate
requests and during negotiations with its peers.
From Global Configuration mode, type ipsec identity, and press Enter.
98 ■ Accessing Command Modes
JUNOSe 11.1.x System Basics Configuration Guide

Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X Specifications

General

Brand	Juniper
Model	SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X
Category	Software
Language	English