Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X User Manual

■ There is no no version.
■ See exit.
help
■ Use to display basic information about the interactive help system.
■ Example
host1#help
Use the help options as follows:
?, or command<Space>? - Lists the set of all valid next keywords or
arguments
partial-keyword? - Lists the keywords that begin with a certain
character string
partial-keyword<Tab> - Completes the partial keyword
■ There is no no version.
■ See help.
run
■ Use to issue an Exec mode command from any CLI configuration command
mode.
■ Example
host1(config)#run show configuration | begin interface
■ The run command functions the same as the do command.
■ There is no no version.
■ See run.
sleep
■ Use to make the CLI pause for a specified period of time (in seconds).
■ Pausing is very useful in configuration script files.
■ Example
host1#sleep 60
■ There is no no version.
■ See sleep.
Managing vty Lines
The system supports 30 virtual tty (vty) lines for Telnet, SSH, and FTP services. Each
Telnet, SSH, or FTP session requires one vty line. When you connect to the router
through a vty line, the number of the vty line is not assigned sequentially; instead,
the system assigns the first vty line that passes the host access list check rules.
258 ■ Managing vty Lines
JUNOSe 11.1.x System Basics Configuration Guide

Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X Specifications

General

Brand	Juniper
Model	SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X
Category	Software
Language	English