Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X

0 Unknown Context Report PDUs
0 Unsupported Security Level Report PDUs
0 Not in time Window Report PDUs
0 Unknown Username Report PDUs
0 Unknown Engine ID Report PDUs
0 Wrong Digest Report PDUs
0 Decryption Error Report PDUs
■ There is no no version.
■ See baseline snmp.
Viewing SNMP Status
To view SNMP status on your network, use the following show commands.
show snmp
■ Use to display all the information about SNMP status.
■ To display statistics relative to the current baseline, use the delta keyword.
■ Field descriptions
■ Contact—Router’s contact person
■ Location—Router’s location
■ SNMP packets input—Total number of SNMP packets received by the router
■ Bad SNMP version errors—Number of SNMP PDUs with a bad version
number
■ Unknown community name—Number of SNMP PDUs that had an
unrecognized community name
■ Illegal operation for community name supplied—Number of access
violations based on the configured privilege level for community strings
■ Encoding errors—Number of AS number version 1 encoding and
decoding errors
■ Number of requested variables—Number of variable bindings processed
by the SNMP agent
■ Number of altered variables—Number of variable bindings processed
successfully in SNMP set commands
■ Get-request PDUs—Number of get-exact SNMP PDUs processed
■ Get-next PDUs—Number of get-next SNMP PDUs processed
■ Set-request PDUs—Number of set SNMP PDUs processed
240 ■ Monitoring SNMP
JUNOSe 11.1.x System Basics Configuration Guide