Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X User Manual

exit Exit from the current command mode
fabric-strict-priority Allow packets in this class to be dequeued out of the
fabric ahead of other traffic classes
help Describe the interactive help system
log Configure logging settings
macro Run a CLI macro
no Negate a command or set its default(s)
run Run an exec mode command (alias command do)
sleep Make the Command Interface pause for a specified duration
Traffic Class Group Configuration Mode
In this mode, you can create and configure traffic-class groups, which can contain
multiple traffic classes.
From Global Configuration mode, type the traffic-class-group command and a
trafficClassGroupName, and press Enter.
host1(config)#traffic-class-group trafclasnameabcd
host1(config-traffic-class-group)#?
default Set a command to its default(s)
do Run an exec mode command (alias command run)
exit Exit from the current command mode
help Describe the interactive help system
log Configure logging settings
macro Run a CLI macro
no Negate a command or set its default(s)
run Run an exec mode command (alias command do)
sleep Make the Command Interface pause for a specified duration
traffic-class Set the traffic class belong to this group
Tunnel Group Configuration Mode
In this mode, you can define up to 31 tunnels for a tunnel group.
From Global Configuration mode, type aaa tunnel-group and the groupName, and
press Enter.
host1(config)#aaa tunnel-group storm
host1(config-tunnel-group)#?
default Set a command to its default(s)
do Run an exec mode command (alias command run)
exit Exit from the current command mode
help Describe the interactive help system
log Configure logging settings
macro Run a CLI macro
no Negate a command or set its default(s)
run Run an exec mode command (alias command do)
sleep Make the Command Interface pause for a specified duration
tunnel Configure tunnel tag
Tunnel Group Tunnel Configuration Mode
In this mode, you can configure attributes for a tunnel group tunnel.
Accessing Command Modes ■ 121
Chapter 2: Command-Line Interface

Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X Specifications

General

Brand	Juniper
Model	SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X
Category	Software
Language	English