Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X User Manual

Table 50: IP-Related Protocols (continued)
Description of FlowCLI Name
IP Multicast listener packetipMld
Ip Multicast/Broadcast not otherwise classifiedipMulticastBroadcastOther
IP Multicast route table missesipMulticastCacheMiss
IP Multicast route table Auto-RP missesipMulticastCacheMissAutoRp
IP IGMP packets for the ICipMulticastControlIc
IP Multicast control packet not otherwise classifiedipMulticastControlSc
IP Multicast DHCP destined for SCipMulticastDhcpSc
IP VRRP packetsipMulticastVrrp
IP Multicast on wrong interfaceipMulticastWrongIf
IPv6 Neighbor DiscoveryipNeighborDiscovery
IPv6 Neighbor Discovery missipNeighborDiscoveryMiss
IP Path MTU requestipNormalPathMtu
IP options not otherwise classifiedipOptionsOther
IP Router AlertipOptionsRouterAlert
OSI packetsipOsi
IP packets that have been reassembled on a server cardipReassembly
IP packets with no route indicationipRouteNoRoute
Packets routed to the SRP EthernetipRouteToSrpEthernet
IP TTL expiredipTtlExpired
DoS Protection Group Configuration Example
NOTE: To configure a DoS protection group for an interface, you must configure the
settings under the default group, which is the only group that is currently supported.
To configure a DoS protection group for an interface:
host1(config)#dos-protection-group default
host1(config-dos-protection)#protocol AtmOam rate 512
host1(config-dos-protection)#protocol PppoeControl rate 512
host1(config-dos-protection)#protocol IpLocalOther rate 512
Denial of Service (DoS) Protection ■ 465
Chapter 7: Passwords and Security

Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X Specifications

General

Brand	Juniper
Model	SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X
Category	Software
Language	English