Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X User Manual

exec-banner
motd-banner
timeout login response 30
data-character-bits 8
no login
log engineering
log verbosity low
no log severity
log verbosity low NameResolverLog
log verbosity low aaaAtm1483Cfg
log verbosity low aaaEngineGeneral
log verbosity low aaaServerGeneral
log verbosity low aaaUserAccess
log verbosity low addressServerGeneral
log verbosity low atm
log verbosity low atm1483
log verbosity low atmAal5
log verbosity low bgpConnections
log verbosity low bgpDampening
log verbosity low bgpEng1
--More--
Responding to Prompts
For some actions, the system prompts you for a response. The acceptable default
responses are the following:
■ You can press y or Enter to agree with the prompt and continue.
■ You can press any other key to disagree with the prompt and cancel the action.
You can use the confirmations explicit command to require a more explicit response
to CLI prompts.
confirmations explicit
Use to require an explicit response to a CLI prompt, as follows:■
■ To agree with the prompt and continue, you must type y and press Enter,
type ye and press Enter, or type yes and press Enter.
■ To disagree with the prompt and cancel the action, you must type n and
press Enter or type no and press Enter.
■ Pressing Enter alone, or entering any other characters, is not an acceptable
response, and the CLI will repeat the prompt.
■ Acceptable responses to a prompt are not case sensitive.
■ Use the no version to restore the default state, where pressing y or Enter
alone responds in the affirmative, and any other entry is accepted as a
negative response.
46 ■ Overview
JUNOSe 11.1.x System Basics Configuration Guide

Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X Specifications

General

Brand	Juniper
Model	SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X
Category	Software
Language	English