Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X User Manual

Table 28: QoS Schema Objects (continued)
DefinitionObject
Configure QoS schema to export the statistics profile namestatistics-profile
Configure QoS schema to export the weight assigned to
the queue
weight
Configure QoS schema to export the number of bytes of
yellow traffic that were dropped on the queue
yellow-dropped-bytes
Configures QoS schema to export the number of yellow
packets that were dropped on the queue
yellow-dropped-packets
By default, a collector exports all queue attributes to its receiver. However, by choosing
one or more QoS schema objects listed in Table 28 on page 218, you can configure
the QoS schema to export specific queue attributes.
You can associate an interface type with the QoS schema to enable the queue statistics
collection on all line modules for every queue belonging to each instance of the
specified interface type.
You can restrict or limit the statistics collection to a particular location or virtual
router group by specifying the location of a particular slot, port, or virtual router
group.
You can view the QoS rate statistics over each S-VLAN or ATM virtual path by including
the export-summarized-stats keyword in the bulkstats schema subtree qos
command. This keyword enables the export of the aggregate traffic rate to the
receivers.
Configuring Schemas
To configure a schema for collecting bulk statistics on an interface:
1. Configure a bulk statistics schema.
host 1(config)#bulkstats schema 11
2. Assign a collector to the schema. The collector determines when the queue
information is exported for the schema.
host1(config)#bulkstats schema 11 collector 11
See “Configuring Collectors and Receivers” on page 199 for information about
configuring collectors.
3. Specify the management schema to collect bulk statistics. In this particular
example, the QoS schema is configured to collect bulk statistics.
host1(config)#bulkstats schema 11 subtree qos
4. Specify the type of interface on which you want to collect the statistics.
220 ■ Collecting Bulk Statistics
JUNOSe 11.1.x System Basics Configuration Guide

Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X Specifications

General

Brand	Juniper
Model	SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X
Category	Software
Language	English