Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X User Manual

service Configure service-name table entries
sleep Make the Command Interface pause for a specified duration
Profile Configuration Mode
In this mode, you can configure a profile to subsequently configure dynamic IP
interfaces.
From Global Configuration mode, type the profile command followed by a profile
name of up to 80 characters, and press Enter.
host1(config)#profile germany78
host1(config-profile)#?
default Set a command to its default(s)
do Run an exec mode command (alias command run)
exit Exit from the current command mode
help Describe the interactive help system
ip Configure IP characteristics
l2tp Configure L2TP characteristics
log Configure logging settings
macro Run a CLI macro
no Negate a command or set its default(s)
ppp Configure PPP parameters
pppoe Pppoe information
run Run an exec mode command (alias command do)
sleep Make the Command Interface pause for a specified duration
QoS Interface Set Configuration Mode
In this mode, you can can configure QoS interface sets.
From Global Configuration mode, type the qos-interface-set command followed by
an interfaceSetName, and press Enter.
host1(config)#qos-interface-set video
host1(config-interface-set)#?
default Set a command to its default(s)
do Run an exec mode command (alias command run)
exit Exit from the current command mode
help Describe the interactive help system
log Configure logging settings
macro Run a CLI macro
member-interface-type Define the member interface type of the interface set
no Negate a command or set its default(s)
qos-interface-parent Select a QoS interface super set as the parent of this
interface.
qos-parameter Instantiate a QoS parameter for this interface
qos-profile Attach/Detach a qos-profile
restricted Define restricted interface
run Run an exec mode command (alias command do)
sleep Make the Command Interface pause for a specified
duration
QoS Interface Superset Configuration Mode
In this mode, you can configure QoS interface supersets.
110 ■ Accessing Command Modes
JUNOSe 11.1.x System Basics Configuration Guide

Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X Specifications

General

Brand	Juniper
Model	SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X
Category	Software
Language	English