Table 30: Mapping Bulkstats Output to MIB Flies and CLI Configurations for QoS schema
DescriptionCLI ConfigurationMIB Object NameMIB File
Bulkstats Output
Column Name
Configure QoS schema for all
queue attributes
all
A textual string containing
information about the interface.
This string should include the
name of the manufacturer, the
product name and the version of
the interface hardware/software
–ifDescrRFC1213ifDescr
A unique value, greater than
zero, for each interface. It is
recommended that values are
assigned contiguously starting
from 1. The value for each
interface sub-layer must remain
constant at least from one
re-initialization of the entity's
network management system to
the next re- initialization
-ifIndexRFC1213ifIndex
The SVLAN or ATM virtual path
ID over which the interfaces of
the specified queue are stacked.
---SVLAN/VP ID
The unique traffic class name
within the traffic policy
configured for the queue.
---Traffic-Class-Name
The shaping rate associated with
the parent interface in the
scheduling hierarchy of the
queue.
The attribute is a 32–bit integer.
shaping-ratersAcctngParentShapingRatersacctngParentNodeShapRate
The shared shaping rate
associated with the parent
interface in the scheduling
hierarchy of the queue.
The attribute is a 32–bit integer.
shared-shaping-ratersAcctngParentSharedShapRatersacctngParentNodeSharedShapRate
The total weight of the child
queues for a parent node in the
scheduling hierarchy.
The attribute is a 32–bit integer.
parent-weightrsAcctngParentChildWeightrsacctngParentNodeChildrenWeight
The drop profile name associated
with the egress queue.
The attribute is a 32–bit
character string.
drop-profilersAcctngDropProfilersacctngQDropProfile
Collecting Bulk Statistics ■ 231
Chapter 4: Configuring SNMP
To Next Page
Loading...