Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X User Manual

Table 30: Mapping Bulkstats Output to MIB Flies and CLI Configurations for QoS schema (continued)
DescriptionCLI ConfigurationMIB Object NameMIB File
Bulkstats Output
Column Name
The queue profile name
associated with the egress
queue. This attribute can be 32
characters long.
The attribute is a 32–bit
character string.
queue-profilersAcctngQueueProfilersacctngQQueueProfile
The scheduler profile name
associated with the egress
queue.
The attribute is a 32–bit
character string.
scheduler-profilersAcctngSchedulerProfilersacctngQSchedulerProfile
The statistics profile name
associated with the egress
queue.
The attribute is a 32–bit
character string.
statistics-profilersAcctngStatisticsProfilersacctngQStatsProfile
The shaping mode associated
with the egress queue.
In the shape mode, is used to
control the downstream rate for
different media.
shaping-modersAcctngShapingModersacctngQShapMode
The shaping rate attribute of the
egress queue.
In the shape mode, when queue
is guaranteed a certain
percentage of bandwidth, the
queue cannot use more than the
allocated bandwidth even if the
link is idle. For egress queues,
the QShapRate attribute returns
the bit rate at which the traffic
for the queue is shaped.
The attribute is a 32–bit integer.
shaping-ratersAcctngShapingRatersacctngQShapRate
The length of the egress queue.
The attribute is a 32–bit integer.
queue-lengthrsAcctngQueueLengthrsacctngQLength
The burst attribute of the egress
queue.
The attribute is a 16–bit integer.
burstrsAcctngBurstrsacctngQBurst
232 ■ Collecting Bulk Statistics
JUNOSe 11.1.x System Basics Configuration Guide

Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X Specifications

General

Brand	Juniper
Model	SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X
Category	Software
Language	English