Table 30: Mapping Bulkstats Output to MIB Flies and CLI Configurations for QoS schema (continued)
DescriptionCLI ConfigurationMIB Object NameMIB File
Bulkstats Output
Column Name
The weight attribute of the
queue. The weight of the queue
determines the bandwidth that
will be allocated to the queue
during congestion.
The attribute is a 16–bit integer.
weightrsAcctngWeightrsacctngQWeight
The assured rate for the queue.
The attribute is a 32–bit integer.
assured-ratersAcctngAssuredRatersacctngQAssuredRate
Indicates if the Random Early
Detect (RED) is enabled for the
queue.
RED-enabledrsAcctngRedEnabledrsacctngQREDEnabled
Indicates the type of
shared-shaping enabled on the
queue.
shared-shaping-modersAcctngSharedShapingModersacctngQSharShapType
Indicates the rate of
shared-shaping enabled on the
queue.
The attribute is a 32–bit integer.
shared-shaping-ratersAcctngSharedShapingRatersacctngQSharShapRate
The type of byte adjustment
application configured on the
queue.
byte-adjustment-typersAcctngByteAdjTypersacctngQByteAdjType
The number of bytes for the byte
adjustment application
configured on the queue.
byte-adjustment-bytesrsAcctngByteAdjBytesrsacctngQByteAdjBytes
The average forward rate of the
queue. It is averaged over the
rate period of the
statistics-profile associated with
the queue.
The attribute is a 64–bit integer.
forwarded-ratersAcctngForwardedRatersacctngQFwdedRate
The average drop rate of the
queue, including red, green and
yellow packets. It is calculated
over the rate period of the
queue’s statistics profile.
The attribute is a 64–bit integer.
aggregate-drop-ratersAcctngAggDropRatersacctngQAggDropRate
The number of packets that were
forwarded on the queue.
The attribute is a 64–bit integer.
forwarded-packetsrsAcctngForwardedPacketsrsacctngQFwdedPkts
Collecting Bulk Statistics ■ 233
Chapter 4: Configuring SNMP
To Next Page
Loading...