Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X

Table 30: Mapping Bulkstats Output to MIB Flies and CLI Configurations for QoS schema (continued)
DescriptionCLI ConfigurationMIB Object NameMIB File
Bulkstats Output
Column Name
The number of octets that were
forwarded on the queue.
The attribute is a 64–bit integer.
forwarded-bytesrsAcctngForwardedBytesrsacctngQFwdedOctets
The number of green packets
which were chosen to be
discarded even though no errors
had been detected to prevent
their being received.
The attribute is a 64–bit integer.
green-drop-packetsrsAcctngGreenDropPacketsrsacctngQGreenDiscardPkts
The number of green octets
which were chosen to be
discarded even though no errors
had been detected to prevent
their being received.
The attribute is a 64–bit integer.
green-drop-bytesrsAcctngGreenDropBytesrsacctngQGreenDiscardOctets
The number of yellow packets
which were chosen to be
discarded even though no errors
had been detected to prevent
their being received.
The attribute is a 64–bit integer.
yellow-drop-packetsrsAcctngYellowDropPacketsrsacctngQYellowDiscardPkts
The number of yellow octets
which were chosen to be
discarded even though no errors
had been detected to prevent
their being received.
The attribute is a 64–bit integer.
yellow-drop-bytesrsAcctngYellowDropBytesrsacctngQYellowDiscardOctets
The number of red packets
which were chosen to be
discarded even though no errors
had been detected to prevent
their being received.
The attribute is a 64–bit integer.
red-drop-packetsrsAcctngRedDropPacketsrsacctngQRedDiscardPkts
The number of red octets which
were chosen to be discarded
even though no errors had been
detected to prevent their being
received.
The attribute is a 64–bit integer.
red-drop-bytesrsAcctngRedDropBytesrsacctngQRedDiscardOctets
234 ■ Collecting Bulk Statistics
JUNOSe 11.1.x System Basics Configuration Guide