Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X User Manual

run Run an exec mode command (alias command do)
samples-of-history-kept Specify the maximum history samples
sleep Make the Command Interface pause for a specified duration
tag Specify the user defined tag
timeout Specify the operation timeout
tos Specify a value for the ToS byte
type Specify the type of the entry
Scheduler Profile Configuration Mode
In this mode, you can configure a scheduler profile. You can then set the shaping
rate value, enable the strict-priority scheduling for the scheduler node, or set the
weighted-round-robin (WRR) value of the scheduler node or queue.
From Global Configuration mode, type scheduler-profile and the scheduleProfileName
that you want to create or configure, and press Enter.
host1(config)#scheduler-profile A990
host1(config-scheduler-profile)#?
default Set a command to its default(s)
do Run an exec mode command (alias command run)
exit Exit from the current command mode
help Describe the interactive help system
log Configure logging settings
macro Run a CLI macro
no Negate a command or set its default(s)
run Run an exec mode command (alias command do)
shaping-rate Shape the node or queue to the specified rate
sleep Make the Command Interface pause for a specified duration
strict-priority Dequeue strict priority packets ahead of other packets
weight Set the relative weight of the node or queue
Service Session Profile Configuration Mode
In this mode, you can set and modify Service Manager service session profile
attributes, such as time, volume, and statistics.
From Global Configuration mode, type the service-management
service-session-profile command and the profileName, and then press Enter.
host1(confi)#service-management service-session-profile vodISP1
host1(config-service-session-profile)#?
default Set a command to its default(s)
do Run an exec mode command (alias command run)
exit Exit from the current command mode
help Describe the interactive help system
log Configure logging settings
macro Run a CLI macro
no Negate a command or set its default(s)
run Run an exec mode command (alias command do)
sleep Make the Command Interface pause for a specified duration
statistics Configure statistics
time Configure time
volume Configure volume
118 ■ Accessing Command Modes
JUNOSe 11.1.x System Basics Configuration Guide

Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X Specifications

General

Brand	Juniper
Model	SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X
Category	Software
Language	English