■ Example 1
host1(config-mgmtevent-trigger)#agent context-name router1 wildcard
■ Example 2
host1(config-mgmtevent-trigger)#agent context-name router1 wildcard limit 15
NOTE: SNMP server security defaults to no access. When using a separate virtual
router, you must use the snmp-server security command and provide read or
read-write access to other virtual routers.
■ Use the no version to return to the default context (virtual router).
■ See agent context-name.
boolean-test
■ Use to define Boolean test values for the trigger that you are configuring, including
comparison settings, a Boolean value, a startup condition, and binding an event
to the Boolean-test trigger.
■ Example 1—Specifying a comparison setting
host1(config-mgmtevent-trigger)#boolean-test comparison less
■ Example 2—Specifying a Boolean value to which the test compares
host1(config-mgmtevent-trigger)#boolean-test value 5175438
■ Example 3—Binding an event to the Boolean-test trigger
host1(config-mgmtevent-trigger)#boolean-test event sysadmin booleanTrigger
■ Example 4—Setting the trigger to not perform a Boolean test on startup
host1(config-mgmtevent-trigger)#boolean-test startup
■ Use the no version to delete the Boolean-test values for this trigger or to remove
either the startup condition or event binding.
■ See boolean-test.
delta-sampling
■ Use to specify delta sampling for the trigger you are configuring.
■ Example
host1(config-mgmtevent-trigger)#delta-sampling
■ (Optional) Use the discontinuity-id option to specify a discontinuity MIB ID for
the sample. The discontinuity MIB ID monitors the sample for any discontinuity
errors during the sample frequency. If a discontinuity error occurs, the router
removes the sampling for that interval.
Configuring the SNMP Server Event Manager ■ 185
Chapter 4: Configuring SNMP
To Next Page
Loading...