show snmp management-event
■ Use to view statistical SNMP event information for event table entries, router
resources, and trigger table entries.
■ Omit the events, resource, statistics, or triggers options to obtain a full output.
■ Field descriptions
■ Resource
■ SampleMinimum—Minimum number of samples to be taken
■ SampleInstanceMaximum—Maximum number of samples to be taken
■ SampleInstances—Number of sample instances being monitored
■ SampleInstancesHigh—Highest number of samples taken for any of the
sample instances
■ SampleInstancesLacks—Number of times this system could not take a
new sample because that allocation would have exceeded the limit set
by mteResourceSampleInstanceMaximum
■ Triggers
■ Owner—Owner value assigned to the trigger
■ Name—Name value assigned to the trigger
■ Test—Type of trigger test to perform
■ SampleType—Type of sampling (absolute or delta) to perform
■ ValueID—Object ID of the MIB sample for this trigger
■ ValueIDLimit—Not supported in this release; reads as zero
■ ValueIDWildcard—Not supported in this release; reads as False
■ ContextName—Management context (for example, router1) from which
to obtain mteTriggerValueID
■ ContextNameRgulrExprssn—Not supported in this release
■ ContextNameLimit—Not supported in this release; reads as zero
■ ContextNameWildcard—Not supported in this release; reads as False
■ Frequency—Frequency at which this trigger is sampled
■ ObjectsOwner—Not supported in this release
■ Objects—Not supported in this release
■ Enabled—State (False [disabled] or True [enabled]) of the trigger
■ EntryStatus—Active/inactive status of the instance
■ Boolean
190 ■ Configuring the SNMP Server Event Manager
JUNOSe 11.1.x System Basics Configuration Guide
To Next Page