Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X

host1(config)#bulkstats traps nearly-full
14. (Optional) Collect bulk statistics per virtual router.
host1(config)#bulkstats virtual-router-group collector 2 routerISP3
NOTE: The bulk statistics feature supports generating files on a per interface basis.
bulkstats collector
■ Use to assign the data collector.
■ Example
host1(config)#bulkstats collector 2
■ Use the no version to delete the collector.
■ See bulkstats collector.
bulkstats collector collect-mode
■ Use to specify the way the collector retrieves bulk statistics.
■ Example
host1(config)#bulkstats collector 2 collect-mode auto
■ Use the no version to specify that either the user or the system will initiate
transfers manually.
■ See bulkstats collector.
bulkstats collector description
■ Use to add descriptive information to the bulk statistics file.
■ Example
host1(config)#bulkstats collector 2 description customer xyz
■ Use the no version to remove descriptive text from the bulk statistics file.
■ See bulkstats collector.
bulkstats collector interval
■ Use to specify the time interval in seconds for which the collector transfers data
to the receivers.
■ Example
host1(config)#bulkstats collector 2 interval 1000
■ Use the no version to set this time to the default, 360 seconds (6 minutes).
■ See bulkstats collector.
200 ■ Collecting Bulk Statistics
JUNOSe 11.1.x System Basics Configuration Guide