Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X

■ Field descriptions
■ chassis—Number of slots, midplane identifier, and hardware revision number
■ 14Slot—5 Gbps, 14 slot midplane
■ midplaneId7Slot—5 Gbps, 7 slot midplane
■ midplaneIdRx1400—10 Gbps ASIC compatible, 12 line module slots, 2
SRP module slots for ERX14xx models
■ midplaneIdRx700—10 Gbps ASIC compatible, 5 line module slots, 2
SRP module slots for ERX7xx models
■ 17 slot—100 or 320 Gbps, 17-slot midplane for the E120 router
■ 11 slot—320 Gbps, 11-slot midplane for the E120 router
■ fabric—Capacity and hardware revision of the fabric
■ fans—Status of fans
■ nvs—Status and capacity of NVS and amount of space used
■ power—States of power feeds
■ AC power—For ERX310 router only; states of power feeds
■ srp redundancy—Availability of a redundant SRP module
■ slots: cards missing or offline—Status of each slot
■ online
■ standby
■ offline
■ empty
■ line redundancy—Number of redundancy groups installed
■ width—Number of slots the redundant midplane covers
■ spare—Slot that contains a spare line module
■ primary—Slot that contains the primary line module
■ fabric redundancy—Status of redundancy on the switch fabric on the E120
and E320 routers
■ ok
■ none
■ temperature—Status of the system temperature
■ timing—Source of the timing signal
■ primary—Type and status of the primary timing signal
■ secondary—Type and status of the secondary timing signal
338 ■ Monitoring the System
JUNOSe 11.1.x System Basics Configuration Guide