EasyManua.ls Logo

Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X

Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X
640 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
host1#show version
Juniper Edge Routing Switch ERX-1400
Copyright (c) 1999-2005 Juniper Networks, Inc. All rights reserved.
System Release: 6-0-1p0-5.rel
Version: 6.0.1 patch-0.5 (January 28, 2005 14:55)
Active hotfixes:
hf63036.hfx (Id: 1020)
hf63037.hfx (Id: 1030)
System running for: 7 days, 3 hours, 55 minutes, 5 seconds
(since FRI FEB 04 2005 13:01:30 UTC)
The show boot command displays the current boot settings, including armed hotfixes
that will be activated when the router reboots.
host1#show boot
System Release: 6-0-1p0-5.rel
Armed Hotfixes: hf63035.hfx
hf63036.hfx
hf63037.hfx
System Configuration: running-configuration
The header of the show configuration command output includes the armed hotfix
summary. You can issue the show configuration system file-system command to
display the boot hotfix commands that restore the router to its current configuration
when you issue the configuration script on a router configured with factory defaults.
Hotfixes that are active when you issue the show configuration command are not
part of the command output or the resulting configuration script. Only armed hotfixes
are part of the show configuration script.
host1#show configuration system file-system
! Configuration script being generated on TUE MAR 22 2005 16:43:41 UTC
! Juniper Edge Routing Switch ERX-1400
! Version: 6.0.1 patch-0.5 (January 28, 2005 14:55)
! Active hotfixes: hf63036.hfx (Id: 23453036)
! hf63037.hfx (Id: 34563037)
! Copyright (c) 1999-2005 Juniper Networks, Inc. All rights reserved.
!
! Commands displayed are limited to those available at privilege level 15
!
boot config running-configuration
boot system 6-0-1p0-5.rel
boot hotfix hf63036.hfx
boot hotfix hf63037.hfx
no boot backup
no boot subsystem
no boot backup subsystem
no boot force-backup
show hotfix
Use to display the name, ID, activation and arming status, and dependencies for
all hotfixes or a specific hotfix available on the local file system.
You can issue the detail keyword to additionally display a synopsis of the hotfix
behavior. The detailed output for a specific hotfix also indicates compatible and
incompatible hotfixes and lists modules affected by the hotfix.
Field descriptions
398 Updating the Router with JUNOSe Hotfix Files
JUNOSe 11.1.x System Basics Configuration Guide

Table of Contents

Related product manuals