Timestamps of latest time sample from this peer:
Root reference at: Thu, Apr 13 2000 17:27:17.145 from 128.118.25.3
Broadcast was sent: Thu, Apr 13 2000 17:42:02.118
Broadcast received: Thu, Apr 13 2000 17:42:02.067
Sample buffer for this peer contains the following samples:
Delay (sec): 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
Offset (sec): 0.049 0.050 0.050 0.050 0.050 0.050 0.051 0.051
Dispersion(sec): 0.015 0.015 0.014 0.013 0.012 0.011 0.010 0.009
■ See show ntp associations.
show ntp status
■ Use to view the configuration and status of the system.
■ Field descriptions
■ NTP Status—State of NTP on the system and the stratum number of the
server
■ No. of associations—Number of peer associations for the NTP server
■ Clock Status:
■ Offset Error—Time difference between the system and the master, in
seconds
■ Frequency Error—Error in the frequency of the system’s clock, in seconds
per second
■ Last Update—Last time received from the master
■ Root Dispersion—Measure of all the errors associated with the network
hops and servers between the system and its stratum 1 server, in seconds
■ Configuration:
■ Admin. State—Status of NTP on the router (enabled or disabled)
■ Virtual Router Name—Name of the virtual router to which you attached
NTP
■ Broadcast Delay—Time for a broadcast message to travel between the
server and the client, in microseconds
■ Client Mode—NTP client status (True – system is an NTP client; False –
system is not an NTP client)
■ Master Mode—NTP server status (True – system is configured as an NTP
server; False – system is not configured as an NTP server)
■ Stratum No.—Stratum number of system if configured as NTP server
■ Summer Time—Status of seasonal time, True or False
■ Summer Timezone Name—Name of summer time zone
■ Timezone Name—Name of time zone
536 ■ Monitoring NTP
JUNOSe 11.1.x System Basics Configuration Guide
To Next Page
Loading...