Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X User Manual

Configuration Protocol (DHCP). This method is particularly convenient for
broadband (cable and DSL) environments or environments that use bridged
Ethernet over ATM, because network operators can support one central system
rather than an individual PPPoE client on each subscriber’s computer. See JUNOSe
Broadband Access Configuration Guide.
Configuring Remote Access ■ 27
Chapter 1: Planning Your Network

Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X Specifications

General

Brand	Juniper
Model	SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X
Category	Software
Language	English