timeout 10000
!
■ See show configuration.
show ip forwarding-table slot
■ Use to display the memory used by each VR configured on a line module and
free memory available on the line module.
■ Field descriptions
■ Free Memory—Amount of memory free on the line module, in kilobytes
■ Virtual Router—Name of the virtual routers configured on the line module
■ Memory (KB)—Amount of memory consumed by the VR, in kilobytes
■ Load Errors—Counts errors made while loading the routing table on the line
module
■ Status—Indicates whether the routing table for the VR is valid
■ Example
host1#show ip forwarding-table slot 9
Free Memory = 14,328KB
Virtual Router Memory Load Errors Status
(KB)
---------------- --------- ------------- --------
vr1 4128 0 Valid
vr2 3136 0 Valid
vr3 2256 0 Valid
vr4 1512 0 Valid
default 1024 0 Valid
-----------------------------------------------------------
■ See show ip forwarding-table slot.
show virtual-router
■ Use to display the virtual routers and VRFs configured on your router.
■ Use the summary keyword to display only the total number of virtual routers
and the total number of VRF instances.
■ Use the detail keyword to display the status of the routing protocols configured
for each virtual router.
■ Use the summary keyword with the detail keyword to display the number of
VRF instances for each virtual router.
■ Use the output filtering feature of the show command to include or exclude lines
of output based on a text string you specify. See “Command-Line Interface” on
page 29, for details.
■ Example 1
Monitoring Virtual Routers ■ 547
Chapter 11: Configuring Virtual Routers
To Next Page
Loading...
Need help?
General
