Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X User Manual

Table 58: E Series Hardware Standards (continued)
Protocol or
FeatureReference
EMCEN55022 Class A (CISPR-22 Class A)
EMCEN55024, Annex C for WAN Equipment Performance Criteria A, B, and C
SafetyEN60825-1, Safety of Laser Products - Part 1: Equipment Class,
Requirements, and User’s Guide (2001)
SafetyEN60950:2000, 3rd Edition, Safety of Information Technology Equipment
EMCETSI 300-386, Telecommunication Network Equipment; ElectroMagnetic
Compatibility (EMC) requirements
EMCFCC Part 15 Class A
EMCFCC PART 68
NEBSGR-63 (LSSGR, FD-15): Network Equipment Building System (NEBS)
Requirements: Physical Protection, Issue 1, October 1995
NEBSGR-1089 (LSSGR, FD-15): Electromagnetic Compatibility and Electrical
Safety - Generic Criteria for Network Telecommunications Equipment,
Issue 2, Revision 1, February 1999
SafetyIEC 825-1, Safety of Laser Products - Part 1
SafetyIEC 60950-1(2001-10) Ed. 1.0 Information technology equipment - Safety
- Part 1: General requirements
EMCIECS-003 Issue 3 Class A
CablesITUT G.703, Physical/electrical characteristics of hierarchical digital
interfaces (November 2001)
SafetyLow Voltage Directive (73/23/EEC)
TelecomPD7024—Essential requirements for terminal equipment intended for
connection to unstructured digital leased circuits of the public
telecommunications network using a CCITT recommendation G,703
interface at a rate of 2048 kbit/s with a 75 ohm unbalanced presentation,
1994
TelecomRTTE Directive (1999/5/EEC)
SafetySR-3580 (FD-15): Network Equipment Building System (NEBS) Criteria
Levels, Issue 1, November 1995
SafetyUL 60950, 3rd Edition, Safety of Information Technology Equipment
EMCVCCI (Voluntary Control Council for Interference by Information Technology
Equipment)
Hardware Standards ■ 591
Appendix B: References

Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X Specifications

General

Brand	Juniper
Model	SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X
Category	Software
Language	English